I have bricked my Dash 35B how do I recover it?

You can recover the Dash 35B by connecting a USB cable to the 3-pin button connector and 5V to the 5-pin connector as shown below:

Open VESC Tool and follow the steps below:

1. Go to ESP Programmer
2. Refresh the port until you see the ESP32 of the display
3. Press Connect
4. Select VDISP 900
5. Erase LispBM
6. Flash using USB
7. Disconnect

Then you should be able to connect to it from the welcome and wizard page.
After connecting follow the steps below:

1. Go to VESC Packages
2. Update archive
3. Select Dash35B
4. Install

Now it should be restored