I have bricked my Dash 16L how do I recover it?

You can recover the VESC Dash 16L by connecting a USB cable to the 6-pin connector as shown below:

Open VESC Tool and follow the steps below:

1. Go to ESP Programmer
2. Refresh the port until you see the ESP32 of the display
3. Press Connect
4. Select Dash16
5. Erase LispBM
6. Flash using USB
7. Disconnect

Then you should be able to connect to it from the welcome and wizard page.
After connecting follow the steps below:

1. Go to VESC Packages
2. Update archive
3. Select Dash16
4. Install

Now it should be restored